Hi Everyone,

I'm looking for some help with a few details regarding the oil cooler that was fitted to the 2.8 RSR.

As some here will be aware I recently commissioned the fabrication of the 1974 Behr Oil Cooler that was fitted to 3.0 RS/RSR for my own 3.0RS build; it was a long winded process where I learnt a lot and met some very skilled professionals along the way who helped with the fabrication. The coolers turned out pretty good, details here - https://www.early911sregistry.org/fo...ral-Oil-Cooler



A friend then mentioned he just happened to have a NOS original 2.8 Oil Cooler and suggested it would be good to produce a few of these too.....



....well, with an original cooler to copy/scan, having met all the right people who could help and having been asked a number of times about the possibility of producing a 2.8 cooler it seemed it would be daft not to!

It's early days but the original cooler is in the process of being copied and full drawings produced for the end tank castings to be made and for final cooler fabrication....





....