Before Reinvent the (steering) wheel...

[Michael Meldrum]

Thats a good deal, wish I had bought from him!

One of our members sells them as well...
http://www.early911sregistry.org/for...hlight=leather

[37yrold911]

aren't those too large to fit the Momo wheel hub? As in 2x or 3x the size??

[diegok]

Is the one in the picture from Stoddards? Seems like the Sierra Madre one is not done with a high quality leather or a very detailed emblem. Thanks!

[Michael Meldrum]

It might have more to do with my awful camera skills

Is the one in the picture from Stoddards? Seems like the Sierra Madre one is not done with a high quality leather or a very detailed emblem. Thanks!

[Michael Meldrum]

The patch is too big but the momo horn button looks like it is big enough to fit the emblem.

aren't those too large to fit the Momo wheel hub? As in 2x or 3x the size??

[mcampuzano]

Just gluing the leather patch won't work, the plastic tabs have to me modified to allow for the leather's thickness. I did 2 for a friend on Momo, one suede, one leather.

IIRC, the regular Momo horn buttons are plastic and have 4 plastic tabs holding them on with a circular spring or circlip going around on the inside of the tabs. That Singer ring looks exactly like a matte silver version of the black plastic one on the Momo wheels. It might be plastic or maybe metal.

So if you removed a regular Momo horn button and just covered it with a section of leather with an embossed crest..

[merbesfield]

Guys have any pics?

[Michael Meldrum]

I think this project is above my skill level to do it right!

Anyone else able to do this as a service?

[Merv]

I just pulled apart an old metal-ringed Momo button and if you slightly trim the circumference of an old plastic button to suit the leather thickness and re-clip, it is really easy. All depends on the size of the available 'Porsche' leather-stamped material. The crest on my old 'puck' with the MOMO ring placed on it, is larger than possible. If there was a smaller crest in leather .. Just about any material could be used (not that I did).

[Michael Meldrum]

I spoke to one of the techs from Singer Vehicle Design, they do theirs in-house, so it's not going to be possible to just go out and buy one of these.