Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: 380 mm leather wrapped steering wheel

  1. #1
    Senior Member
    Join Date
    Nov 2010
    Location
    Highlands,Nc
    Posts
    1,414

    380 mm leather wrapped steering wheel

    SOLD SOLD SOLD It is commonly known that the 70,71 914 347 805 10 wheel is physically the same as the 1973 911 Carrera RS. This one has the Extended Hub. It has the
    Non Counter sunk area around the spline. This rare wheel has been hanging on the wall of my office for many years. Leather appears to
    Have been redone at some point. Very nice condition. Take a look at the pics. Price $650 shipped Con US

    IMG_2747.jpgIMG_2748.jpgIMG_2749.jpgIMG_2750.jpgIMG_2751.jpgIMG_2752.jpgIMG_2753.jpgIMG_2755.jpgIMG_2758.jpgIMG_2760.jpg
    Last edited by 1970rsr; 03-23-2024 at 07:18 AM.
    1965 911 Factory Paint to Sample Orange
    1967 911S Bahama Yellow
    1968 911 S Blood Orange
    1971 911S Gold Metallic Peter Gregg
    1974 Carrera RS Blue Metallic
    1990 RUF RCT Estonia's car

  2. #2
    Senior Member
    Join Date
    Nov 2010
    Location
    Highlands,Nc
    Posts
    1,414
    1965 911 Factory Paint to Sample Orange
    1967 911S Bahama Yellow
    1968 911 S Blood Orange
    1971 911S Gold Metallic Peter Gregg
    1974 Carrera RS Blue Metallic
    1990 RUF RCT Estonia's car

  3. #3
    Senior Member
    Join Date
    May 2012
    Location
    UK
    Posts
    2,762
    Disagree the actual part number for the RS is 806.10

    This is the paper parts book 72/3 which is quite clear on the wheel part number for the RS

    IMG_7477.jpg

    Also I have a genuine first series RS with its wheel attached and still with early RS only plastic horn push attached For avoidance of doubt it is marked 806.10 not 805.10.

    As is wheel on a 22k mile low owner second series RS that I know well.

    It might be an excellent wheel worth every penny but it is important part numbers for original RS don’t get confused which is why as long term RS owner I bother to comment

    Steve
    Last edited by 911MRP; 10-07-2023 at 07:15 AM.

  4. #4
    Senior Member
    Join Date
    Dec 2010
    Location
    Wilmington, DE
    Posts
    1,403
    That's not true at all. 805 was early 914-4. 806 was 914-6 and the one used for 73RS builds. Since 914-6's were assembled at the Porsche factory and 914-4's were assembled at the Karmann factory, it makes sense that Porsche pulled parts for the RS from the Porsche bin and not VW. You have a nicely redone thick grip, extended hub (also not an RS feature) I used to make something very similar and sell them for $800-1000.
    A part isn't purchased until paid.

    The 9 Store LLC.

  5. #5
    Member #226 R Gruppe Life Member #147
    Join Date
    Feb 2009
    Location
    Portland, Oregon
    Posts
    2,355
    That sure looks like an extended hub?

  6. #6
    Senior Member
    Join Date
    May 2012
    Location
    UK
    Posts
    2,762
    Agree with mepstien… the 806.10 wheels for the earlier RS are typically date stamped several years prior than the car’s actual date of production so Porsche evidently used up old stock 806.10 wheels that were probably originally intended for the 914/6. Picked and used what could have been dead stock for the earliest of Carrera RS examples. The 914/6 was defunct by time assembly of RS started in earnest so it makes practical sense . Another case of Porsche being frugal in consuming nos inventory! When stocks those earlier dated 806.10 ran out the 806.10 then seen in RS typically have a date stamp much more aligned to the date of its chassis production suggesting they’d ordered fresh batches of 806.10 specifically for the Carrera RS model rather than looking for other part numbers form 914/4 etc that might’ve been similar . That action to have 806.10 made again in 73 for the RS shows they viewed 806.10 as the correct wheel and why 806.10 is the wheel part for an RS listed on the spare parts the catalog and what is found attached to unmolested RS examples.

    Steve
    Last edited by 911MRP; 10-07-2023 at 07:53 AM.

  7. #7
    Few months ago I sold an original 806/10 steering wheel, as above, not the same part number, no extended hub and fairly priced apparently

    https://www.early911sregistry.org/fo...steering-wheel
    #rennfrog

  8. #8
    Senior Member
    Join Date
    Nov 2010
    Location
    Highlands,Nc
    Posts
    1,414
    All sounds good. I was relying on many old threads here on Early S. It’s Physically the same as the 73 RS wheel. I have made some
    Edits to wording and price. Enjoy. T

    IMG_2819.jpg
    1965 911 Factory Paint to Sample Orange
    1967 911S Bahama Yellow
    1968 911 S Blood Orange
    1971 911S Gold Metallic Peter Gregg
    1974 Carrera RS Blue Metallic
    1990 RUF RCT Estonia's car

  9. #9
    Senior Member
    Join Date
    Dec 2010
    Location
    Wilmington, DE
    Posts
    1,403
    That chart has some incorrect items. 805 10 was only 914-4. 803 10 was hard rimed 914-6, not 914-4. No mention of 804 10, hard rim early, 914-4 wheel.

    I've owned multiples of all the wheels listed, some removed from one owner, non modified cars. It's not rocket science but easy to make mistakes when someone who is well known like Jim, puts out an incorrect chart and people think its gospel.

    Even calling the above 914-4 wheel with an extended hub a RS styled wheel is incorrect. RS cars never had the hub spacer. Using a hub spacer on a 380mm wheel is a good mod for an SWB car since otherwise, the rim sits too close to the dash. The 420mm wheels didn't need a hub spacer. Careful wording on an ad doesn't make it something it's not. The spacers are sold aftermarket as is the leather wrap. Calling a steering wheel rare because you aren't familiar with 914 wheels doesn't make it rare.
    Last edited by mepstein; 10-07-2023 at 01:20 PM.
    A part isn't purchased until paid.

    The 9 Store LLC.

  10. #10
    People rely on the Sticky thread on these wheels. I am sure the community would greatly appreciate if the experts on this topic could update the sticky thread with the correct and complete info and light others’ candles. GLWS
    ——————
    Member #: 3701
    1972 911TE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.