Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Oil leak guidance

  1. #1
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,395

    Oil leak guidance

    I now have 99.9% of the kinks out of my 71S which was a nuts and bolts restoration and full engine and gearbox build. However, I have what seems to be at least a couple of oil leaks. The engine and gearbox shop have offered to take the car and fix without cost. Before I do that, and in the interest of learning, I thought I would see if I could fix first. There seems to be at least two engine leaks and also a gearbox link - blue color. Attached below are some photos. Seems like I would need to remove the heat exchangers yo get a decent look. Any advice ?

    Name:  IMG_2801.jpg
Views: 400
Size:  138.2 KB
    Name:  IMG_2807.jpg
Views: 400
Size:  100.1 KB
    Name:  IMG_2812.jpg
Views: 405
Size:  139.5 KB
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow

  2. #2
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,395
    Name:  IMG_2820.jpg
Views: 389
Size:  92.7 KB
    Name:  IMG_2799.jpg
Views: 391
Size:  112.3 KB
    Name:  IMG_2822.jpg
Views: 388
Size:  97.0 KB
    Attached Images Attached Images  
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow

  3. #3
    Senior Member Simonjjb's Avatar
    Join Date
    Dec 2013
    Location
    Connecticut/Florida
    Posts
    1,395
    Name:  IMG_2809.jpg
Views: 390
Size:  100.8 KB

    A few photos
    1968 911L Coupe - Golden Green
    1971 911S Coupe - Gemini Blue
    1973 911S Targa - Signal Yellow
    1974 914 2.3 - Sunflower Yellow

  4. #4
    Senior Member Scott A's Avatar
    Join Date
    May 2014
    Location
    South East USA
    Posts
    912
    I know a long long term Porsche mechanic, he sprays this transparent clear film on his seams.
    He sprays it about 3 or more times, letting it dry and build up, and pretty heavy.

    He usually does it after a rebuild, and turns his motor upside down on the engine stand.

    He never has a leak.

    Name:  IMG_2983.jpg
Views: 386
Size:  51.5 KB

    He even does it with every oil change at the big nut.
    (I’m just the messenger here).
    Last edited by Scott A; 07-15-2023 at 04:41 AM.

    Current long term ownership: 63 Cab, 71 911, 74 914

  5. #5
    Senior Member
    Join Date
    Oct 2010
    Location
    Southern Ca.
    Posts
    1,173
    It appears to be Swepco oil in the transaxle , in my experience this oil essentially dissolves Yamabond type sealants , I'm not a fan . The one leak at the bottom of the trans - engine may be coming from the oil thermostat , oil pressure sending unit area . There are probably a hundred places for oil to leak on a 911 engine so good luck .

  6. #6
    Senior Member uai's Avatar
    Join Date
    Jan 2011
    Location
    Horb a.N. Germany
    Posts
    2,561
    The best method for finding leaks:
    Pressure wash (really thoroughly)
    Let it completetly dry
    Genreously powder with French Chalk (or similar e.g. baby powder)
    Don't be shy (it washes off easily) I sometimes blow it with pressurized air to the hard to reach sports.
    Prepare Endoscope / Mirror Lamp etc. and go for a short drive (1-2 miles).
    You'll see where it leaks. Don't drive too far otherwise you won't see where it leaks.
    Name:  1.jpeg
Views: 318
Size:  154.7 KB

    If you drive too far you won't see where it leaks
    Name:  2.jpeg
Views: 311
Size:  189.5 KB
    Last edited by uai; 07-17-2023 at 03:29 AM.

  7. #7
    member #1515
    Join Date
    Mar 2009
    Location
    San Antonio, Texas
    Posts
    4,263
    Some times our cars leak when not used much. Getting things nice and hot might help.
    David

    '73 S Targa #0830 2.7 MFI rebuilt to RS specs

  8. #8
    Senior Member
    Join Date
    Oct 2010
    Location
    Southern Ca.
    Posts
    1,173
    Getting things hot will absolutely not help , maybe some oil on the heat exchanger will burn away .

  9. #9
    Senior Member
    Join Date
    Apr 2012
    Location
    Durham, NC
    Posts
    509
    I find this stuff effective. Obviously a thorough engine clean is necessary prior to use. https://www.amazon.com/dp/B002M4G24U...=auto+oil+leak
    Tom
    Attached Images Attached Images  

  10. #10
    Sometimes it isn't the mechanics fault. I once had to do a flywheel seal twice (964) . (Porsche dealer seal) When it leaked again a conversation with Wrightwood, Rosemary suggested using old style SC black/brown seal. Solved leak!
    Early S Registry member #90
    R Gruppe member #138
    Fort Worth Tx.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Message Board Disclaimer and Terms of Use
This is a public forum. Messages posted here can be viewed by the public. The Early 911S Registry is not responsible for messages posted in its online forums, and any message will express the views of the author and not the Early 911S Registry. Use of online forums shall constitute the agreement of the user not to post anything of religious or political content, false and defamatory, inaccurate, abusive, vulgar, hateful, harassing, obscene, profane, sexually oriented, threatening, invasive of a person's privacy, or otherwise to violate the law and the further agreement of the user to be solely responsible for and hold the Early 911S Registry harmless in the event of any claim based on their message. Any viewer who finds a message objectionable should contact us immediately by email. The Early 911S Registry has the ability to remove objectionable messages and we will make every effort to do so, within a reasonable time frame, if we determine that removal is necessary.