You can always make it from a part like this if you have some simple tools. https://www.aasesales.com/products/c...7e8cc244&_ss=r
Ravi
Printable View
You can always make it from a part like this if you have some simple tools. https://www.aasesales.com/products/c...7e8cc244&_ss=r
Ravi
Good idea, Ravi. Cutting and reshaping of the clip offered by AASE would certainly work. I did not previously consider that, but before submitting my original post, did communicate with the guys at AASE about that particular clip. I went in a different direction because the inside diameter is larger than that of the vacuum hose outside diameter.
To further assess options, I sent an e-mail to Schellen-Shop (the German company I linked in my previous post). They responded this morning, stating they do not have US distributors but offered to provide a quote.
anyone have an update on this tough to find clamp?
Sorry, Dmill. I was lucky enough to secure one from a fellow ESR member (it was his last) so I did not pursue the other option which was to order a Rohrschelle (pipe clamp) 7 DIN 1596 from https://www.schellen-shop.de/rohrbef...-gelb-verzinkt.
If anyone has one of these they would part with....i am a buyer....Thx...DM